Christie CP2000-M Service Booklet page 106

Table 4.1 Function Codes
None
EXAMPLES:
(TDT+C101 1) set Output Reference Delay Time to 1 on channel 101
(TDT+C101?) get Output Reference Delay Time on channel 101
Input Frame Dominance (TFD)
DESCRIPTION
Setup Input Frame Dominance for 3D control. This selects which signal is considered first in the source signal,
the left or the right.
SUBCODE
Cxxx
None
EXAMPLES:
(TFD?L) list all entries on Input Frame Dominance control.
(TFD+C101 1) set Input Frame Dominance to 1 on channel 101.
(TFD+C101?) get Input Frame Dominance on channel 101
3D frame rate multiple (TFR)
DESCRIPTION
Setup frame rate multiple for 3D control
SUBCODE
Cxxx
None
EXAMPLES:
(TFR?L) list all entries on the frame rate multiple factor
(TFR+C101 1) set frame rate multiple to "4:2" on channel 101
(TFR+C101?) get frame rate multiple on channel 101
Input Reference GPI (TGI)
DESCRIPTION
Setup Input Reference General Purpose Input for 3D control. Selects the signal to be used to synchronize the
video processing so the system knows which eye the images are targeted for.
SUBCODE
Cxxx
None
EXAMPLES:
(TGI?L) list all entries on Input Reference GPI control
(TGI+C101 1) set Input Reference GPI to 1 on channel 101
(TGI+C101?) get Input Reference GPI on channel 101
Input Reference (TIR)
DESCRIPTION
Setup Input timing Reference for 3D control.
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)
Select reference delay for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select frame dominance for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select 3D frame rate for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select Input reference GPI for the current channel.
Section 7: Serial Communications
4-25