Overview - Christie CP2000-M Service Booklet

Section 4: Troubleshooting
3.1

OVERVIEW

The CP2000-M/MR offers a comprehensive system of diagnostics, tracking a wide range of conditions
and alerting the operator to a potential problem by displaying specific status information on the
Control Display Panel (CDP), through the web ui, or via available internal or external LEDs.
This system includes:
CDP Status Icons
CDP Status LED Indicators
CDP Status Menu
Web User Interface Red Alarm Window
Web User Interface Status Page
Internal PCB-specific LEDs and Main AC status LED
When troubleshooting, keep in mind the projector is comprised of numerous replaceable modules,
such as printed circuit boards, optical assemblies and power supplies. This modular design can reduce
the amount of time required to accurately diagnose and resolve a performance issue — the cause need
only be traced down to the module level, at which point the faulty module is usually replaced. No
further analysis is necessary. If the problem is not resolved contact technical support. For contact
information, refer to
information can also be found on Christie's website at www.christiedigital.com.
3-2
Table 2.1 Technical Support Contact Information, on page 2-2. Product
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)