5.4
Removing Projector Covers
5.4.1 Shroud
Remove the shroud as follows:
1. Using finger pressure, push down on the locations
specified (Red Arrows). See Figure 5-1.
1. Carefully slide the shroud sideways and forward away
from the lens.
1. Place the shroud covers on a clean service to prevent
scratches.
5.4.2 Front Top Lid
(Estimated Replacement Time: 2 minutes)
Remove the top lid to gain access to the light engine
and liquid cooling system compartments.
1. Unlock front top lid using the low security key
provided (Figure 5-2).
2. Lift the lid up and remove.
D4K25 Service Manual
020-100880-01 Rev. 1 (06-2012)
Never operate the projector or the fans without all the covers installed.
Section 5: Parts and Module Replacement
Figure 5-1 Shroud Removal
Figure 5-2 Front Top Lid
5-5