Christie CP2000-M Service Booklet page 105

Section 7: Serial Communications
Table 4.1 Function Codes
EXAMPLES:
(TDI?L) list all entries on Display Reference GPI control
(TDI+C101 1) set Display Reference GPI to 1 on channel 101
(TDI+C101?) get Display Reference GPI on channel 101
3D Dark Time (TDK)
DESCRIPTION
Setup Dark Time for 3D control. This controls how much time between displayed images the output remains dark
to allow for the glasses on other gating mechanism to flip between the eyes.
SUBCODE
Cxxx
None
EXAMPLES:
(TDK+C101 1) set Dark Time to 1 on channel 101
(TDK+C101?) get Dark Time on channel 101
Output Reference Delay (TDP)
DESCRIPTION
Setup Output Reference Delay phase for 3D control. Additional control for output timing relative to input timing.
SUBCODE
Cxxx
None
EXAMPLES:
(TDP+C101 1) set Output Reference Delay phase to 1 on channel 101
(TDP+C101?) get Output Reference Delay phase on channel 101
3D Display Reference (TDR)
DESCRIPTION
Setup display reference timing signal for 3D control.
SUBCODE
Cxxx
None
EXAMPLES:
(TDR?L) list all entries on display reference control
(TDR+C101 1) set display reference to 1 on channel 101
(TDR+C101?) get display reference on channel 101
Output Reference Delay (TDT)
DESCRIPTION
Setup Output Reference Delay Time for 3D control. Controls how much delay between the input and output
reference timing.
SUBCODE
Cxxx
4-24
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select dark time for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select output reference delay phase for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select display reference for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)