Top Lid; High Security Lid - Christie CP2210 Service Manual

5.5.5 Top Lid

(Estimated Replacement Time: 6 minutes)
1. Use a #2 Phillips
securing the top lid to the projector housing (Figure 5-5
2. Unlock the rear access door using the low security key.
3. Lift the lid up from the rear of the projector and pull it away
from the two tabs on the front skin.
4. When reinstalling, align the front two tabs and reverse the
above steps.

5.5.6 High Security Lid

The high security lid secures the light engine and cardcage components. NOTICE: Only Christie authorized
service technicians should open the high security lid.
(Estimated Replacement Time: 8 minutes)
1. Remove the top lid. Refer to
7.
2. Use the high security key to unlock the security lid.
3. Lift the lid up and out.
CP2210 Service Manual
020-100556-04 Rev. 1 (01-2012)
to loosen the seven captive screws
™
5.5.5 Top Lid, on page 5-
Section 5: Parts and Module Replacement
).
Figure 5-5 Remove Top Lid
Figure 5-6 High Security Lid
5-7