Point Table Setting; Actual Operation - Mitsubishi Electric MELSERVO-J3 Series Instruction Manual

5. OPERATION

5.2.5 Point table setting

Set necessary items to the point table before starting operation. The following table indicates the items that
must be set.
Name
Position data
Servo motor speed
Acceleration time constant
Deceleration time constant
Dwell
Auxiliary function
Refer to section 5.4.2 for details of the point table.

5.2.6 Actual operation

Start actual operation after confirmation of normal operation by test operation and completion of the
corresponding parameter settings. Perform a home position return as necessary.
Set the position data for movement.
Set the command speed of the servo motor for execution of positioning.
Set the acceleration time constant.
Set the deceleration time constant.
Set the waiting time when performing automatic continuous operation.
Set when performing automatic continuous operation.
Description
5 - 7