3. DISPLAY AND OPERATION SECTIONS
3.5 Point table setting
You can set the target position, servo motor speed, acceleration time, deceleration time, dwell, sub function
and M code.
(1) Display transition
Point table transition
Point table No. 1
Point table No. 2
Point table No. 3
SET button
UP
DOWN
Point table No. 253
MODE button
Point table No. 254
Point table No. 255
3 - 16
Setting item transition
Target position
Servo motor speed
Acceleration time
constant
Deceleration time
constant
Dwell
Sub function
M code
UP
DOWN