Chapter 2 Preparations
2.
Install the RAID controller into the PCI slot #4 and fix it in place. Be careful not to disconnect the
battery control cable.
3.
Connect the cables and components that you removed.
1.10.3
Removal
To remove the extra battery for the RAID controller, reverse the installation procedure.
1.10.4
Installing the flash backup unit that comes with N8103-168
Install the flash backup unit that comes with N8103-168 RAID controller the by using the following procedure.
64
RAID controller
Note
Read through the manual supplied with the RAID controller before installation.
Connecting the flash backup unit control cable
Getting ready to install the flash backup unit
Installing the flash backup unit
Connecting to RAID controller
Express5800/T110g-E User's Guide
1. Installing Internal Optional Devices
Finish