Table of Contents
Advertisement
Chapter 2 Preparations
1.18
VMware ESXi USB flash memory for installation
(N8106-016/017)
VMware ESXi USB flash memory for installation (N8106-016/017) can be connected to USB 3.0 connector inside
the device.
Two types of USB flash memory are prepared.
①
N8106-016
Two microSDs able to install and boot VMware ESXi and USB conversion kit
②
N8106-017
USB flash memory able to install and boot VMware ESXi
Notes
N8106-016 2x8GB microSD card installing kit (USB) is equipped with RAID1 function.
The function cannot be installed with M.2 SATA SSD.
This product does not include an install media of ESXi and the license.
Mounting of USB flash memory N8106-016/017
When installing the components, follow the steps below.
1.
Prepare referring to Step 1- 6 stated in "Chapter 2 (1.2 Outline of Installing/ Dismantling)" of this book.
2.
Confirm the position of USB 3.0 connector inside.
2x8GB microSD card installing kit (USB)
8GB USB memory
Note
In order to prevent the damage for the electronic parts, start the installation of
system after providing proper anti-static treatment. If a proper earth is not
provided, electrostatic discharge may occur.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
125
Advertisement
Table of Contents
