Table of Contents
Advertisement
Chapter 1 General Description
4.8
Status Indicators
LEDs on the front side of the unit
・2.5-inch drive model
No.
1
Power switch and system
*1
power LED
2
Status LED
*1
3
LINK/ACT LED
4
UID switch/LED
※Do not reboot the iLO from
the boot of the server until
the completion of the OS
boot and during using the
System Utilities.
*1
If all the four LEDs described in this table is flashing at the same time, it indicates that a power failure has
occurred. For details, refer to (2) Power failure LED.
*2
The power is not supplied, the power cord is not connected, the power supply unit is not installed, the
power supply unit is defect, or the power cord is disconnected.
*3
If the STATUS LED indicates a degraded or critical condition, check the system IML or use iLO to check
the system status.
Item
Lights in green
Flashes in green (once per
second)
Lights in amber
Lights off
Lights in green
Flashes in green (once per
second)
Flashes in amber
Flashes in red (once per
second)
*1
Lights in green
Flashes in green (once per
second)
Lights off
*1
Lights in blue
Flashes in blue (once per
second)
Flashes in blue (4 times
per second)
Flashes in blue (8 times
per second)
Lights off
Express5800/R120h-2M (3rd-Gen) User's Guide
Status
The system is powered on
The power on sequence in progress
The system is in standby state
Power is not supplied
Normal state
Restarting iLO
The function of the system is deteriorating
The system is in a critical state
Linked to the network
The network is working
The network is not working
Working in operation
Remote management or firmware upgrade is
in progress
The iLO restart sequence using the UID
switch has been launched
The iLO restart sequence using UID switch
is in progress
Not working
4. Names and Functions of Parts
Description
*2
*3
*3
35
Advertisement
Table of Contents
