Pci Riser Card / Pci Card; Pci Riser Card; Full Length Pci Card Installation Kit; Graphics Card Installation Kit - NEC Express5800/R120f-2M System Configuration Manual

Hide thumbs Also See for Express5800/R120f-2M:
Table of Contents

Advertisement

SYSTEM CONFIGURATION GUIDE

7 PCI Riser Card / PCI Card

Please refer to
can mount PCI card supported.
7.1

PCI Riser Card

Product Name / Description
PCIe Riser Card Kit
8 x PCIe 3.0 x8
PCIe x16 Riser Card Kit
1 x PCIe 3.0 x16, 6x PCIe 3.0 x8, auxiliary power connector (8pin)
PCIe x16 Riser Card Kit
1 x PCIe 3.0 x16, 6x PCIe 3.0 x8, auxiliary power connector (8+6pin)
7.2

Full Length PCI Card installation Kit

For a full-length PCI card (D=312mm/12.28 in) installation in PCI Slot #2C
Product Name / Description
Full Length PCI Card installation Kit
For a full-length installation, contains special heat sinks
NOTE:
Since this product is make-to-order manufacturing, the support is provided individually. Contact your
sales representative for details.
7.3

Graphics Card Installation Kit

For an installation of the video card which is used for Micorosoft RemoteFX
Product Name / Description
Graphics Card Installation Kit
Power cables for video card (6+2pin) , a retainer to secure the graphics board
Graphics Card Installation Kit
Power cables for video card (6+2pin, 6pin) , two retainers to secure the graphics board
NOTE:
Since this product is make-to-order manufacturing, the support is provided individually. Contact your
sales representative for details.
This product does not support/guarantee installation of general video cards on R120f-2M
N8116-34 is required for N8116-38 and N8116-34A is required for N8116-38A.
7.4

Network Interface Controller

Category
LOM card
1GbE
Required
10GbE
NEC Corporation
NEC Express5800/R120f-2M
Supported PCI Cards and Installable Slots
Product Name / Description
Quad Port 1000BASE-T LOM Card
Broadcom® BCM5719
PCIe 2.0 x4
Dual Port 10GBASE-T LOM Card
Intel® Ethernet Controller X540
PCIe 2.0 x8
Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card
Broadcom® NetXtreme II BCM57800S
PCIe 2.0 x8
NOTE:
- Available in October, 2014.
- N8104-129 SFP+ Module is required to connect with an optical
cable.
- Up to two SFP+ Modules can be installed.
Revision 6.0 – April 17, 2015
with regard to the position of PCI slot which
Part Number
(Standard)
N8116-34
N8116-34A
Part Number
N8116-37
Part Number
N8116-38
N8116-38A
Part Number
N8104-154F
N8104-155F
N8104-156F
27

Advertisement

Table of Contents
loading

Table of Contents