Display Language For Multiline Terminal; Default Setting Patterns For Multiline Terminal; Kid Of Tone For Ip Station/Tdm; Setting For Each Unit - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE
04
FUNCTION:
This command is used to assign the language that is displayed on the Multiline Terminal/DESKCON
LCDs, the default setting patterns for Multiline Terminal, the Kind of Tone for IP Station/TDM, the In-
quiry No. in password lock state for DT700 Series, the Single Line Telephone ringing signal for station-
to-station connection, the Single Line Telephone ringing signal from a trunk, the ringing signal for Sin-
gle Line Telephone ring, the setting of services, and the A-law/µ-law setting for each Unit.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + 04YY + DE
TITLE:
DISPLAY LANGUAGE FOR MULTILINE TERMINAL/DESKCON LCD, DEFAULT SETTING
PATTERNS FOR MULTILINE TERMINAL, KIND OF TONE FOR IP STATION/TDM, INQUIRY
NO. IN PASSWORD LOCK STATE FOR DT700 SERIES, SINGLE LINE TELEPHONE
RINGING SIGNAL FOR STATION-TO-STATION CONNECTION, SINGLE LINE TELEPHONE
RINGING SIGNAL FROM A TRUNK, SPECIAL RINGING SIGNAL FOR SINGLE LINE
TELEPHONE RING, SETTING OF SERVICES, A-LAW/µ-LAW SETTING FOR EACH UNIT
1ST DATA
DE
+ + +
(2 digits)
2ND DATA
+ EXE
(1-32 digits)
3-9
CM04
NWA-033623-001 Rev.3.0
91ch3001.fm
NOVEMBER/12/2008