Install Nec Esmpro Agent - NEC Express 5800 Series Installation Manual

Chapter 2 Installing Bundled Software

1.1.2 Install NEC ESMPRO Agent

Connect to the ESXi host from vSphere Client to configure.
1. Set the ft control software Install DVD to the DVD drive of the machine where vSphere Client is
installed.
2. Select the ftSys Management Appliance in the left pane of vSphere Client, and click the CD/DVD
button on toolbar to connect with the DVD drive that contains ft control software Install DVD.
3. Log in to ftSys Management Appliance as a root user.
4. Mount the ft control software Install DVD. When /mnt/cdrom directory exists, the making of the
directory is unnecessary by mkdir command.
# mkdir /mnt/cdrom
# mount /dev/cdrom /mnt/cdrom
5. Run the following command to change the directory that contains NEC ESMPRO Agent.
# cd /mnt/cdrom/NEC/esmpro-sa/
6. Run the following command to install the NEC ESMPRO Agent.
# rpm -ivh Esmpro-*
7. Run the following command to change setting of ESMstrg.
# /sbin/chkconfig ESMstrg off
8. Running the following command displays the messages as shown below.
# cd /opt/nec/esmpro_sa/tools
# ./sethwinf
Enter the number and set the system information.
Examples)
1. Product Name:
2. Product Manufacturer:
3. Chassis Type:
9. Change directory, and unmount the ft control software Install DVD.
# cd /
# umount /mnt/cdrom
Important
Be sure to connect to the ESXi host from vSphere Client.
Do not connect to the vCenter Server.
1. Product Name:
2. Product Manufacturer: Other
3. Chassis Type:
s. Save and quit
q. Quit without save
Please input your selection (1 to 3, s, q):
NEC Express5800/R320d-M4
NEC
Rack
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
1. Bundled Software for the Server
Other
Other
71