Front Panel
The front panel is a one-piece assembly. The removable filler panels are
attached to the front panel and the corresponding EMI shields are attached to the
front of the chassis. If you are installing peripheral devices in the external bays
above the 3.5-inch floppy disk drive, you must remove the front cover along
with the corresponding filler panel and EMI shield.
Removing the Front Panel
Note: The front panel is secured with six locking tabs.
1. Power off the system as described earlier in this chapter.
2. Remove the front panel by carefully pulling it off the front of the system
chassis. Use an even amount of pressure around the edges of the panel. See
Figure 4-24.
4-26 Upgrading Your System
Figure 4-24. Removing the Front Panel