Installing Bundled Software; Installing Bundled Software (See Chapter 2); 2.6.2 How To Check The Kernel And Ft Control Software Version; Enabling Os Boot Monitoring Feature - NEC Express Server Express5800 Series Installation Manual

Chapter 1 Installing Operating System
2.6

Installing Bundled Software

2.6.1 Installing bundled software (see Chapter 2)

Install the bundled software and configure it according to Chapter 2.

2.6.2 How to check the kernel and ft control software version

Check the kernel and ft control software version by the following command
The version of the kernel being operated :
# uname -r
The version of the ft control software being operated:
# rpm -q ft-eulas
2.7

Enabling OS Boot Monitoring Feature

Enables OS Boot Monitoring feature.
Set OS Boot Monitoring feature to Enabled on BIOS SETUP referring to Chapter 1 (2.2.2 Disabling OS Boot
Monitoring Feature). Then, specify the timeout time for OS Boot Monitoring Timeout parameter appropriately.
42
Specify the timeout time in seconds. Default setting is 600 seconds (10 minutes).
Tips
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
2. Setting up