Incremental Encoder Interface Modules; Table 110: Ssi Transmitter Interface Modules - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
The above SSI Transmitter Interface modules have a total of 4 bytes of user data
in the Input Process Image, which has 2 words mapped into the image.
Word alignment is applied.

Table 110: SSI Transmitter Interface Modules

Input Process Image
Offset
0
1
18.2.5.7

Incremental Encoder Interface Modules

750-631/000-004, -010, -011
The above Incremental Encoder Interface modules have 5 bytes of input data and
3 bytes of output data. The following tables illustrate the Input and Output Process
Image, which have 4 words into each image. Word alignment is applied.
Table 111: Incremental Encoder Interface Modules 750-631/000-004, --010, -011
Input Process Image
Offset
0
1
2
3
Output Process Image
Offset
0
1
2
3
750-634
The above Incremental Encoder Interface module has 5 bytes of input data (6
bytes in cycle duration measurement mode) and 3 bytes of output data. The
following tables illustrate the Input and Output Process Image, which has 4 words
mapped into each image. Word alignment is applied.
Manual
Version 1.0.0
Byte Destination
High Byte
D1
D3
Byte Destination
High Byte
-
D1
-
D4
Byte Destination
High Byte
-
D1
-
-
Low Byte
D0
D2
Low Byte
S not used
D0
-
D3
Low Byte
C not used
D0
-
-
I/O Modules 241
Description
Data bytes
Description
Status byte
Counter word
not used
Latch word
Description
Control byte
Counter setting word
not used
not used