Testing The Network Connection; Figure 29: Example Of A Functional Test - WAGO -I/O-IPC-C6 Manual

68 Commissioning
Pos: 41.7 /Serie 758 (Funk, IPC und PFC)/In Betrieb nehmen/In Betrieb nehmen 758-87x allgemein 5 @ 11\mod_1315222596607_21.doc @ 78218 @ 2 @ 1
8.4

Testing the Network Connection

To check whether you can reach the I/O-IPC at the IP address you have assigned
in the network, carry out the ping network service. To do this, open the prompt in
MS Windows by clicking on the "Start" button and selecting Programs >
Execute. Enter
1. Enter the
window: Example:
2. Press the Enter key. Your PC will send a request that will be answered by
the I/O-IPC. The answer appears in the DOS window. If the error message
"Timeout" appears, the I/O-IPC has not reported properly. Please check
your network setting.

Figure 29: Example of a functional test

3. If the test is completed successfully, close the DOS window.
Pos: 41.8 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
in the "Execute" dialog and click [OK].
cmd
command and the IP address of the I/O-IPC in the DOS
ping
ping 192.168.1.100.
WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0