WAGO -I/O-IPC-C6 Manual page 258

258 Appendix
Table 132: Description of the configuration scripts for "TCP/IP"
Parameter
Type of IP
Address
Configuration
Eth0
IP Address Eth0
Subnet Mask
Eth0
TCP/IP Configuration Eth1
See "TCP/IP Configuration Eth0". When calling, replace eth0 with eth1.
Status Call
get_eth_config
read
eth0 config-type
config_interfaces
interface=eth0
write
config-type=<value>
state=enabled
get_eth_config
read
eth0 ip-address
config_interfaces
write interface=eth0
ip-address=<value>
get_eth_config
read
eth0 subnet-mask
config_interfaces
write interface=eth0
subnet-mask=<value>
WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Output/Input
Way be which the interface
receives its IP address:
static (static assignment),
dhcp (per DHC) or
bootp (per BootP)
Switch on method by which
the interface receives its IP
address. Entries for <value>
are:
static (static assignment),
dhcp (per DHC) or
bootp (per BootP)
Address set for using a
static IP address (static IP).
Change IP address for static
IP. The <value> must
contain an IP address in the
format
number.number.number.
number.
Subnet mask set for using a
static IP address (static IP).
Change subnet mask for
static IP. The <value> must
contain an IP address in the
format
number.number.number.
number.
Validity
immediate
Manual
Version 1.0.0