Plc Configuration Setting Choices; Profibus-Master (I/O-Ipc); Figure 64: "Base Parameters" Tab; Table 58: Description Of The Parameters - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
12.2

PLC Configuration Setting Choices

12.2.1

PROFIBUS-Master (I/O-IPC)

Via the tab for the I/O-IPC, you define the global settings and monitoring
parameters for the PROFIBUS master.
Base Parameter

Figure 64: "Base Parameters" tab

The following table explains the parameters listed in the register:

Table 58: Description of the Parameters

Base Parameters
Module id
Node id
Diagnostic address
Comment
Manual
Version 1.0.0
PROFIBUS Master in CoDeSys 2.3
Parameters that use the runtime system CoDeSys.
Here, you can enter a comment
139