Table 55: Events - WAGO -I/O-IPC-C6 Manual

122 CoDeSys 2.3 Runtime Environment
The following events can be activated:

Table 55: Events

Name
start
stop
before_reset
after_reset
shutdown
excpt_watchdog
excpt_access_violation The event is called if a memory access error to an invalid
excpt_dividebyzero
after_reading_inputs
before_writing_outputs The event is triggered before writing all of the outputs
debug_loop
Description
The event is called directly after the user program starts.
The event is called directly after the user program stops.
The event is called directly before the user program is
reset.
The event is called directly after the user program is
reset.
The event is called directly before the user program is
shutdown.
The event is called if a task watchdog is recognized.
memory area is recognized (incorrect pointer, invalid
array index, invalid data descriptor).
The event is called if a division by zero is recognized.
The event is triggered independent of the user program
after reading all of the inputs.
independent of the user program.
This event is triggered at every task call, if a breakpoint
was reached in this task and the processing of this task is
therefore blocked
WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0