146
PROFIBUS Master in CoDeSys 2.3
Input/Output
Figure 71: "Input/Output" tab
The following table explains the parameters listed in the register:
Table 64: Description of the Parameters
Input/Output
Select >>
<<Delete
Properties
758-874/000-131 WAGO-I/O-IPC-C6
Using this button, transfer the selected 75x components from the
left window to the right window in order to copy the topology of
the 750 station there.
First add the object "No process data channel" to the right
window. You can find the object in the left column under
"Empty modules".
Use this button to remove the added 75x components from the
right window.
Use this button to adjust certain properties of an I/O module
(diagnostics, replacement values, ...).
WAGO-I/O-SYSTEM 750
Manual
Version 1.0.0