Device Description - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Pos: 32.1 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Gerätebeschreibung/Gerätebeschreibung - Überschrift 1 @ 3\mod_1233756084656_21.doc @ 27096 @ 1 @ 1
4

Device Description

Pos: 32.2 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Beschreibung/Beschreibung 758-87x 1 @ 10\mod_1312351630395_21.doc @ 75582 @ @ 1
The I/O-IPC automation device is an industrial PC that can handle the control
tasks of a PLC. It is suitable for mounting on a DIN rail and distinguishes itself
with its various interfaces.
Pos: 32.3 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Beschreibung/Querverweis für den Einsatz im Bereich der Fernwirktechnik – IPC @ 12\mod_1332764250794_21.doc @ 92113 @ @ 1
Telecontrol Applications
If the I/O IPC is used for telecontrol applications, observe both "IEC-61850
Solution for Programmable Telecontrollers" quickstart guide and "Quickstart
Guide for 750-872 ETHERNET Fieldbus Controller." These guides are available
on the Internet at
"IEC-60870 Quickstart Guide".
Pos: 32.4 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Beschreibung/Beschreibung 758-87x 2 @ 10\mod_1312884861387_21.doc @ 76170 @ @ 1
You can connect all available I/O modules of the WAGO-I/O-SYSTEM 750/753
to the I/O-IPC. This allows any analog and digital signals from the automation
environment to be internally processed or to be made available to other devices
through one of the available interfaces.
Pos: 32.5 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Beschreibung/Beschreibung 758-87x 3 @ 10\mod_1312352236554_21.doc @ 75590 @ @ 1
Transfer rates of 10 Mbit/s or 100 Mbit/s are possible via two independent
ETHERNET interfaces in both half-duplex and full-duplex operation.
Pos: 32.6 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Beschreibung/Beschreibung 758-87x 4 DPM @ 10\mod_1312352318180_21.doc @ 75594 @ @ 1
For data exchange, there are implemented MODBUS/TCP,-/UDP and -/RTU
servers available, such as a PROFIBUS master.
PROFIBUS master
The PROFIBUS master currently does not support any DP/V1 services.
Pos: 32.7 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Beschreibung/Beschreibung 758-87x 5 @ 10\mod_1312352618933_21.doc @ 75606 @ @ 1
Automation tasks can be executed in all IEC 61131-3-compatible languages with
the programming system CoDeSys 2.3 (WAGO-I/O-PRO CAA). The
implementation of the CoDeSys task processing is optimized with real-time
extensions in order to provide maximal performance for automation tasks. For
visualization, CoDeSys target visualization and web visualization are also
available in addition to the development environment.
Pos: 32.8 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Beschreibung/Beschreibung 758-87x 6 Zusatz nur für DPM und CANopen @ 10\mod_1312353482658_21.doc @ 75610 @ @ 1
The fieldbus can be configured using the PLC configuration function of CoDeSys
2.3.
Pos: 32.9 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.0.0
www.wago.com  "IEC-61850 Quickstart Guide" and
Device Description 19