Profibus Interface (X3); Figure 7: Interface X3 - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Pos: 34.6 /Serie 758 (Funk, IPC und PFC)/Beschreibung der Schnittstellen/Beschreibung der Schnittstellen 758-87x DPM @ 10\mod_1312375184731_21.doc @ 75816 @ 2 @ 1
5.3

PROFIBUS Interface (X3)

The fieldbus is used for communication between the I/O-IPC and the connected
PROFIBUS fieldbus couplers (slaves).
Open interface!
If this interface is not needed, it shall be closed by the protective cap provided
with delivery in order to prevent any possible damages caused by electrostatic
discharge.
The following table provides information on the PROFIBUS interface pin
assignments.
Table 5: PROFIBUS Interface: Pin Assignments
Connector
5
9
4
8
3
7
2
6
1
Figure 7:
Interface X3
Pos: 34.7 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.0.0
Pin Description
1 NC
2 NC
3 PB+
4 PB_ENA
5 PB_GND
6 PB_+5V
7 NC
8 PB-
9 NC
Description of I/O-IPC Interfaces 35