WAGO -I/O-IPC-C6 Manual page 300

300 Appendix
Time referenced behavior
ACTUAL _ ADD
NEW_ ADD
IDENT_ NUMBER
ENABLE
CONFIRM
RESPONSE
Description
The function of slave addressing is activated when ENABLE switches to TRUE.
For reliable identification of the slave, the ID number must also be given. The
RESPONSE output also indicates error-free or faulty execution when CONFIRM
switches to TRUE.
The following states can be output on the RESPONSE output:
FUNCTION_OK
SERVICE_NOT_ACTIVATED
NO_STATION_RESPONSE
NO_MASTER_TOKEN
The diagnostics block is also used to control active communication of the newly
address slave with the master.
The MODIFICATION input can be used to select whether other address changes
of the slave are permitted or not.
MODIFICATION = FALSE: Other address changes are permitted.
MODIFICATION = TRUE: Other address changes are not permitted.
758-874/000-131 WAGO-I/O-IPC-C6
Function was executed without error
The 'Address Change' service is not
activated on the slave
No response received from the slave
Master does not currently have the token.
Bus short-circuit.
WAGO-I/O-SYSTEM 750
Manual
Version 1.0.0