Clock" Page; Table 33: Description Of The Parameters Of The "Clock" Page - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
9.1.7

"Clock" Page

On this page, configure the real-time clock. To accept your entries, click on the
[CHANGE] button.
Enter the time zone
Your time zone entries are not active until after a restart/reset of the I/O-IPC.

Table 33: Description of the Parameters of the "Clock" Page

Time and Date
Time on device, local
Time on device, UTC
Date on Device
12-Hour-Format
Time Zone
Select
Edit TZ-String
Manual
Version 1.0.0
Set local time here.
Set GMT time here.
Set the date here.
Switching between 12-hour and 24-hour time display.
Select the appropriate time zone for your country here.
Basic setting:
AST/ADT: "Atlantic Standard Time", Halifax
EST/EDT: "Eastern Standard Time", New York, Toronto
CST/CDT: "Central Standard Time", Chicago, Winnipeg
MST/MDT: "Mountain Standard Time", Denver, Edmonton
PST/PDT: "Pacific Standard Time", Los Angeles,
Whitehouse
GMT/BST: "Greenwich Main Time", GB, P, IRL, IS, ...
CET/CEST: "Central European Time", B, DK, D, F, I, CRO,
NL, ...
EET/EEST: "East European Time", BUL, FI, GR, TR, ...
CST: "China Standard Time"
JST: "Japan/Korea Standard Time"
For time zones that cannot be selected using the "Select"
parameter, enter the appropriate time zone for you here. You can
obtain an overview of all time zones at
http://home.tiscali.nl/~t876506/TZworld.html
Information on how to edit the time zone string in Linux can be
found at http://www.minix-vmd.org/pub/Minix-
vmd/1.7.0/wwwman/man5/TZ.5.html
Configuration 77