WAGO -I/O-IPC-C6 Manual page 199

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Table 71: I/O-IPC Operational Messages
Position
37
38
Pos: 51.4 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.0.0
LED Color/Status
IDE/PWR Green
Red
IO Green-red
flashing
Green
Red, flashing
Cause
24V supply voltage is
available on the I/O-
IPC.
24V supply voltage is
available on the I/O-
IPC and it is being
accessed on the internal
flash memory or the CF
card.
The I/O-IPC is in the
startup phase.
No malfunction on the
I/O-IPC.
Display of error
message through blink
code.
Diagnostics 199
Explanation/Remedy
-
-
-
-
Evaluate the error code
(see Section "Error
Messages via I/O-
LED").