758-874/000-131 Wago-I/O-Ipc-C6 - WAGO -I/O-IPC-C6 Manual

22 Device Description
Pos: 32.17 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Anschlüsse/Anschlüsse 758-87x - Tabelle 3 @ 10\mod_1312355828748_21.doc @ 75632 @ @ 1
9
10
11
12
Pos: 32.18 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
DVI interface (X7),
D-sub socket, 24+5
Interface for electronic supply (X4)
Integrated input and output (X5),
15-pole D-sub socket
Serial RS-232 interface (X6),
9-pole D-sub plug
WAGO-I/O-SYSTEM 750

758-874/000-131 WAGO-I/O-IPC-C6

To connect a digital or analog monitor. A "DVI
to VGA" adapter is required to connect a monitor
via a VGA cable.
Power supply for the 24 V electronic supply of
the I/O-IPC. The power supply is protected
against reverse polarity.
Interface for connecting direct digital signal
generators.
Physical connection to the Linux console,
MODBUS/RTU, IO-Check or CoDeSys.
This interface can be configured via Web-based
management or Linux console.
Manual
Version 1.0.0