WAGO -I/O-IPC-C6 Manual page 304

304 Appendix
Time referenced behavior
SLAVE _ ADD
SLOT
INDEX
LENGTH
WRITE _ DATA
ENABLE
CONFIRM
WRITE _ LEN
ERROR
Description
The function is activated when ENABLE switches to TRUE. The
DPM_MSAC1_WRITE transmits data sets to the acyclic channel on a slave
communicating with the master. This data is addressed by SLOT and INDEX.
The LENGTH indicates the length of the data block to be written. WRITE_LEN
outputs the length actually written. If the slave data block is smaller than the
LENGTH input, an error is output to the ERROR output.
WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0