Table 133: Description Of The Configuration Scripts For "Ethernet - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6

Table 133: Description of the configuration scripts for "ETHERNET"

Parameter
ETHERNET
Transmission Mode Eth0
Autonegotiation
Speed and
Duplex Settings
Transmission Mode Eth1
See "Transmission Mode Eth0". When calling, replace eth0 with eth1.
Manual
Version 1.0.0
Status Call
get_eth_config
read
eth0 autoneg
config_interfaces
eth0 autoneg=on
write
config_interfaces
interface=eth0
autoneg=off speed-
duplex=<value>
get_eth_config
read
eth0 speed
get_eth_config
read
eth0 duplex
config_interfaces
interface=eth0
write
autoneg=off
speeed-duplex=<value>
Appendix
Output/Input
Query the status of the
Autonegotiation function:
on
off
Switch on Autonegotiation
function:
on
Switch Autonegotiation
function off:
off
Note:
The speed and duplex value
should be entered when
switching the
Autonegotiation off.
Entries for <value> are:
10-half
10-full
100-half
100-full
Display the ETHERNET
speed.
Display of the duplex value.
Change the ETHERNET
speed and the Duplex
settings.
Entries for <value> are:
10-half
10-full
100-half
100-full
259
Validity
immediate