Linux Console; Access To The Linux Console; Table 69: Users For The Linux Console - WAGO -I/O-IPC-C6 Manual

180 Operating System
Pos: 48.5 /Serie 758 (Funk, IPC und PFC)/Betriebssystem/Betriebssystem Linux 758-87x IPC - Linux-Konsole @ 11\mod_1315392799289_21.doc @ 78647 @ 23 @ 1
14.4

Linux Console

The Linux consoles are available via keyboard as follows:
1. Linux Console
Target visualization
[Alt] + [F1]
If you want to deactivate individual consoles, you must modify the /etc/inittab file
on the device. You can do this using the integrated vi editor or via an FTP
upload/download. The /etc/inittab file contains the following lines:
tty1:2345:respawn:/sbin/getty 38400 tty1
tty2:23:respawn:/sbin/getty 38400 tty2
tty3:23:respawn:/etc/init.d/ipcconfig start
The three command lines start the three consoles described in the table.
If you comment individual lines using the "#" character, the corresponding
commented Linux console is not longer automatically executed during system
start.
14.4.1

Access to the Linux Console

You can access the Linux console through different paths. For one, through
Telnet; for another through the RS-232 interface. The Linux console can also be
accessed through a monitor on the DVI-I interface in combination with a USB
keyboard.
In the condition as delivered to the customer, the I/O-IPC is equipped with the
following users:

Table 69: Users for the Linux Console

Name
root
admin
user
guest
You can also create and delete your own users:
sudo adduser [Benutzer]
sudo deluser [Benutzer] sudo
2. Linux Console
Linux
[Alt] + [F2]
Password
wago
wago
user
guest
WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
3. Linux Console
IPC configuration tool
[Alt] + [F3]
Manual
Version 1.0.0