11.10.1 Incorporating Fonts; Table 56: Name Convention For Fonts (Example) - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6

11.10.1 Incorporating Fonts

For the CoDeSys target visualization, the Truetype fonts Arial and Courier are
available upon delivery.
In addition, you can also incorporate any TrueType fonts (*.ttf). Here, it may be
necessary to take into account the license conditions of the fonts used. Free fonts
are available on the Internet free of charge at
ftp://microwindows.censoft.com/
pub/microwindows/microwindows-fonts-0.90.tar.gz.
To use these fonts, the following steps must be taken:
• The graphics library of the CoDeSys target visualization accesses a
directory in the file system of the WAGO-I/O-IPC in which you must store
these fonts. You must create this directory. The easiest way to do this is via
FTP access from the PC.
• After logging in, you will be in the folder /home of the I/O-IPC file system.
Copy the fonts into the directory
/home/codesys/fontz/truetype.
• The extension of the desired font must always be *.ttf.
• The font name downloaded onto the I/O-IPC must always be related directly
to the name as indicated in the Windows selection box (e.g. Times new
Roman.ttf). Upper and lower case letters, but also spaces should be
observed here. Otherwise, a substitute fonts will be used automatically.

Table 56: Name convention for fonts (example)

CoDeSys selection box
Arial
Courier
Manual
Version 1.0.0
CoDeSys 2.3 Runtime Environment
Font name for Target Visualization
Arial.ttf
Arialb.ttf (Bold)
Ariali.ttf (Italic)
Arialz.ttf (Bold Italic)
Courier.ttf
Courierb.ttf (Bold)
Courieri.ttf (Italic)
Courierz.ttf (Bold Italic)
129