WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
4.
Enter the assignment := behind the variable name.
5.
Repeat step 3 for the variable "PB_Input_Bit".
Figure 77: Example of an assignment of the previously created variables
6.
To compile, click on Project in the menu bar and select Rebuild all.
12.4
Loading the Program in the I/O-IPC
Transfer the program to the I/O-IPC by clicking Online in the menu bar and
selecting Log in. The PROFIBUS starts automatically during the downloading of
the PLC configuration into the I/O-IPC. For more information, see section
"Loading and Executing the PLC Program in Control (ETHERNET)".
Pos: 46.11 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.0.0
PROFIBUS Master in CoDeSys 2.3
PB_Output_Bit:=PB_Input_Bit;
151