WAGO I/O-SYSTEM 750 Manual
  1. Manuals
  2. Brands
  3. WAGO Manuals
  4. I/O Systems
  5. I/O-SYSTEM 750
  6. Manual

WAGO I/O-SYSTEM 750 Manual

Hide thumbs Also See for I/O-SYSTEM 750:
Table of Contents

  • Deutsch
    • Table of Contents

    • 1 Notes about this Documentation
      • Validity of this Documentation
      • Copyright
      • Symbols
      • Number Notation
      • Font Conventions
      • Table 1: Number Notation
      • Table 2: Font Conventions

    • 2 Important Notes
      • Legal Bases
      • Subject to Changes
      • Personnel Qualifications
      • Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying Provisions
      • Technical Condition of Specified Devices
      • Safety Advice (Precautions)

    • 3 Device Description
      • View
      • Table 3: Legend for Figure "View
      • Connectors
      • Data Contacts/Internal Bus
      • Power Jumper Contacts/Field Supply
      • Table 4: Legend for Figure "Power Jumper Contacts
      • Cage Clamp
      • Table 5: Legend for Figure "CAGE CLAMP ® Connectors
      • Display Elements
      • Operating Elements
      • Table 6: Legend for Figure "Display Elements
      • Table 7: Assignment of DIP Switch Settings to Output Voltage
      • Technical Data
      • Device Data
      • Supply
      • Connection Type
      • Table 8: Technical Data - Device
      • Table 9: Technical Data - Supply
      • Table 10: Technical Data - Field Wiring
      • Table 11: Technical Data - Power Jumper Contacts
      • Table 12: Technical Data - Data Contacts
      • Climatic Environmental Conditions
      • Table 13: Technical Data - Climatic Environmental Conditions
      • Approvals
      • Standards and Guidelines

    • 4 Mounting
      • Mounting Sequence
      • Inserting and Removing Devices
      • Inserting the I/O Module
      • Removing the I/O Module

    • 5 Connect Devices
      • Connecting a Conductor to the CAGE CLAMP

    • 6 Use in Hazardous Environments
      • Marking Configuration Examples
      • Marking for Europe According to ATEX and IEC-Ex
      • Table 14: Description of Marking Example for Approved I/O Modules According to ATEX and Iecex
      • Table 15: Description of Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
      • Marking for America According to NEC 500
      • Table 16: Description of Marking Example for Approved I/O Modules According to NEC 500
      • Installation Regulations
      • Special Conditions for Safe Use (ATEX Certificate TÜV 07 ATEX 554086 X)
      • Special Conditions for Safe Use (ATEX Certificate TÜV 12 ATEX 106032 X)
      • Special Conditions for Safe Use (IEC-Ex Certificate TUN 09.0001 X)
      • Special Conditions for Safe Use (IEC-Ex Certificate Iecex TUN 12.0039 X)
      • Special Conditions for Safe Use According to ANSI/ISA

  • English
    • Figure 1: View
    • Figure 2: Data Contacts
    • Figure 3: Power Jumper Contacts
    • Figure 4: CAGE CLAMP ® Connectors
    • Figure 5: Display Elements
    • Figure 6: DIP Switches for Output Voltage
    • Figure 7: Insert I/O Module (Example)
    • Figure 8: Snap the I/O Module into Place (Example)
    • Figure 9: Removing the I/O Module (Example)
    • Figure 10: Connecting a Conductor to a CAGE CLAMP
    • Figure 11: Side Marking Example for Approved I/O Modules According to ATEX and Iecex
    • Figure 12: Text Detail - Marking Example for Approved I/O Modules According to ATEX and Iecex
    • Figure 13: Side Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
    • Figure 14: Text Detail - Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
    • Figure 15: Side Marking Example for I/O Modules According to NEC 500
    • Figure 16: Text Detail - Marking Example for Approved I/O Modules According to NEC 500

    • List of Figures

    • List of Tables

Advertisement

Quick Links

See also: User Manual , Manual
WAGO-I/O-SYSTEM 750
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
750-623
Supply Module DC 24V / 5-15V
Supply Module 24 VDC / 5 V - 15 V
Version 1.2.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Rec htlic hes, Allgemei nes/Impressum für Standardhandbüc her - allg. Angaben, Ansc hriften, T elefonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the I/O-SYSTEM 750 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for WAGO I/O-SYSTEM 750

Summary of Contents for WAGO I/O-SYSTEM 750

  • Page 1 WAGO-I/O-SYSTEM 750 Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1 Manual 750-623 Supply Module DC 24V / 5-15V Supply Module 24 VDC / 5 V - 15 V Version 1.2.0...
  • Page 2 WAGO-I/O-SYSTEM 750 750-623 Supply Module DC 24V / 5-15V © 2016 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-Mail: info@wago.com...

  • Page 3: Table Of Contents

    2.1.1 Subject to Changes ................9 2.1.2 Personnel Qualifications ............... 9 2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying Provisions ................9 2.1.4 Technical Condition of Specified Devices ......... 10 Safety Advice (Precautions) ..............11 Device Description ..................13 View ......................
  • Page 4 Table of Contents WAGO-I/O-SYSTEM 750 750-623 Supply Module DC 24V / 5-15V 6.2.2 Special Conditions for Safe Use (ATEX Certificate TÜV 12 ATEX 106032 X) ................35 6.2.3 Special Conditions for Safe Use (IEC-Ex Certificate TUN 09.0001 X) ................. 36 6.2.4...

  • Page 5: Notes About This Documentation

    Validity of this Documentation Pos : 10 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweis e z ur D okumentati on/Gültigkeits bereic hGültig keitsbereic h D okumentati on Bus kl emme 750- xxxx, ohne Variantenang abe @ 14\mod_1358944037947_21.doc x @ 109346 @ @ 1 This documentation is only applicable to the I/O module 750-623 (Supply Module DC 24V / 5-15V).

  • Page 6: Symbols

    Notes about this Documentation WAGO-I/O-SYSTEM 750 750-623 Supply Module DC 24V / 5-15V Pos : 12.4 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/N eue Ü berschriften/Ebene 2Symbol e - Ü bersc hrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 12.5.1 /All e Serien ( Allgemei ne Module)/Sicherheits- und sons tige Hi nweis e/Gefahr/Gefahr: _War nung vor Pers onenschäden allgemei n_ - Erläuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
  • Page 7 WAGO-I/O-SYSTEM 750 Notes about this Documentation 750-623 Supply Module DC 24V / 5-15V Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 12.6 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.2.0...

  • Page 8: Number Notation

    Pos : 12.10 /Alle Serien (Allgemeine M odul e)/Rechtliches, Allgemeines/Sc hriftkonventi onen @ 3\mod_1221059521437_21.doc x @ 21714 @ @ 1 Table 2: Font Conventions Font Type Indicates italic Names of paths and data files are marked in italic-type. e.g.: C:\Program Files\WAGO Software Menu Menu items are marked in bold letters. e.g.: Save >...

  • Page 9: Important Notes

    PLC programming. Pos : 15.5 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Bes timmungsgemäß e Verwendung Bes ti mmungsgemäße Verwendung 750-xxxx - Ü berschrift 3 und Inhal t @ 3\mod_1224064151234_21.doc x @ 24070 @ 3 @ 1 2.1.3...

  • Page 10: Technical Condition Of Specified Devices

    WAGO-I/O-SYSTEM 750 750-623 Supply Module DC 24V / 5-15V Appropriate housing (per 94/9/EG) is required when operating the WAGO-I/O- SYSTEM 750 in hazardous environments. Please note that a prototype test certificate must be obtained that confirms the correct installation of the system in a housing or switch cabinet.

  • Page 11: Safety Advice (Precautions)

    Pos : 15.10.2 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en/Sic her hei ts- und s onstige Hi nweise/Gefahr/Gefahr: Ei nbau 0750- xxxx nur i n Gehäus en, Sc hränken oder el ektrisc hen Betriebsräumen! @ 6\mod_1260180556692_21.doc...
  • Page 12 Important Notes WAGO-I/O-SYSTEM 750 750-623 Supply Module DC 24V / 5-15V Do not use any contact spray! Do not use any contact spray. The spray may impair contact area functionality in connection with contamination. Pos : 15.11.5 /Alle Serien (Allgemeine D okumente) (Allgemeine M odul e)/Wichtige Erläuter ungen/Sic herheits hinweise/Ac htung/Ac htung: Verpol ung ver mei den! @ 6\mod_1260184045744_21.doc x @ 46767 @ @ 1...

  • Page 13: Device Description

    Pos : 18.9 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Achtung/Achtung: Ü berl astsc hutz 750- 0623 0,5 A /Ac htung: Ü berlastschutz 750-0623 0,5 A / 1,0 A @ 17\mod_1383659220483_21.doc x @ 136708 @ @ 1...

  • Page 14: View

    Pos : 20 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 2Ansicht - Ü bersc hrift 2 @ 4\mod_1240984217343_21.doc x @ 31958 @ 2 @ 1 View Pos : 21 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansic ht/Sys temkl emmen/Ansicht 750-0623 @ 11\mod_1317904638688_21.doc x @ 80763 @ @ 1 Figure 1: View Table 3: Legend for Figure “View”...

  • Page 15: Connectors

    Pos : 25.3 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Achtung/Achtung: ESD - Auf g ute Erdung der U mgebung ac hten! @ 7\mod_1266318538667_21.doc x @ 50708 @ @ 1 Ensure that the environment is well grounded! The devices are equipped with electronic components that may be destroyed by electrostatic discharge.

  • Page 16: Power Jumper Contacts/Field Supply

    Power Jumper Contacts/Field Supply Pos : 28 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üss e/Leistungs kontakte 3 LK (Feder) - Abbil dung - Bus kl emme @ 7\mod_1274962153518_21.doc x @ 57134 @ @ 1 Figure 3: Power Jumper Contacts Pos : 29 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üss e/Leistungs kontakte 3 LK (Feder) - Legende @ 15\mod_1371723810145_21.doc x @ 123738 @ @ 1...

  • Page 17: Cage Clamp

    Device Description 750-623 Supply Module DC 24V / 5-15V Pos : 31 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üss e/CAGE CLAMP- Anschl üss e - Ü berschrift 3 @ 6\mod_1256296337770_21.doc x @ 43674 @ 3 @ 1 ®...

  • Page 18: Display Elements

    Pos : 34 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 2Anzeigeel emente - Ü bers chrift 2 @ 4\mod_1240984390875_21.doc x @ 31964 @ 2 @ 1 Display Elements Pos : 35 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Anz eigeelemente/Systemkl emmen/Anz eigeel emente 750- 06xx (Agn, Cgn) @ 17\mod_1383721395781_21.doc x @ 136728 @ @ 1 Figure 5: Display Elements Table 6: Legend for Figure “Display Elements”...

  • Page 19: Technical Data

    8 mm … 9 mm / 0.33 in Pos : 43.3 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/T echnisc he Daten/Ansc hluss tec hni k/T ec hnisc he D aten Leistungs kontakte (nur F eder) @ 17\mod_1380123979476_21.doc x @ 132801 @ @ 1 Table 11: Technical Data –...

  • Page 20: Climatic Environmental Conditions

    Pos : 45 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/T echnisc he Daten/Kli matische U mg ebungs bedi ngungenTec hnische D aten Klimat. U mgebungsbed. ohne erw. T emp. 0...55°C /-25...+85°C @ 5\mod_1247657968368_21.doc...

  • Page 21: Approvals

    750 > System Description. Pos : 49 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Z ulass ungen/Allgemei n/Z ulass ungen Bus kl emme 750- xxxx Allgemein, ohne Variantenang abe - Einl eitung @ 4\mod_1237460656921_21.doc x @ 28643 @ @ 1 The following approvals have been granted to 750-623 I/O modules: Pos : 50.1 /All e Seri en ( Allgemei ne Dokumente) ( Allgemei ne Module)/Z ulassungen/Standardz ulassungen/C E (Konformi täts kennz eichnung) @ 3\mod_1224494777421_21.doc x @ 24276 @ @ 1...
  • Page 22 750-623 Supply Module DC 24V / 5-15V Pos : 56 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Z ulass ungen/Schiff/Einl eitungss ätz eZ ulass ungen Bus kl emme 750- xxxx Sc hiff, ohne Variantenangabe - Ei nleitung @ 4\mod_1237190918453_21.doc x @ 28420 @ @ 1 The following ship approvals have been granted to 750-623 I/O modules: Pos : 57 /All e Seri en (Allgemei ne Module)/Z ulassungen/Sc hiffsz ul ass ungen/GL (Germanisc her Lloyd) C at.

  • Page 23: Standards And Guidelines

    Standards and Guidelines Pos : 66 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/N ormen und Ric htlini en/EM V-Nor men Bus kl emme 750- xxxx, ohne Variantenang abe - Einl eitung @ 4\mod_1242803944015_21.doc x @ 33642 @ @ 1...

  • Page 24: Mounting

    I/O modules with fewer power contacts. Pos : 73.2 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Vorsic ht/Vorsicht: Verl etz ungsgefahr durc h s charfkantige M ess er kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1 Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged.

  • Page 25: Inserting And Removing Devices

    Mounting 750-623 Supply Module DC 24V / 5-15V Pos : 73.6 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/Geräte einfüg en und entfer nen - Ü berschrift 2 @ 3\mod_1231768483250_21.doc x @ 25950 @ 2 @ 1 Inserting and Removing Devices Pos : 73.7 /All e Seri en ( Allgemei ne Module)/Sicherheits- und s ons tige Hi nweis e/Ac htung/Achtung: Arbeiten an Ger äten nur s pannungsfr ei durc hführ en! @ 6\mod_1256193963573_21.doc x @ 43426 @ @ 1 Perform work on devices only if they are de-energized! Working on energized devices can damage them.

  • Page 26: Removing The I/O Module

    Mounting WAGO-I/O-SYSTEM 750 750-623 Supply Module DC 24V / 5-15V Pos : 73.10 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/D emonti eren/Bus kl emme entfer nen @ 4\mod_1239169375203_21.doc x @ 30334 @ 3 @ 1 4.2.2 Removing the I/O Module Remove the I/O module from the assembly by pulling the release tab.

  • Page 27: Connect Devices

    Connect Devices Pos : 76 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1 ®...

  • Page 28: Use In Hazardous Environments

    Marking for Europe According to ATEX and IEC-Ex Pos : 78.6 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der ATEX- und IEC- Ex-zug elass enen Bus klemmen gemäß C ENELEC und IEC_2013 @ 14\mod_1360569228625_21.doc x @ 111294 @ @ 1 Figure 11: Side Marking Example for Approved I/O Modules According to ATEX and IECEx Figure 12: Text Detail –...

  • Page 29: Table 14: Description Of Marking Example For Approved I/O Modules According To Atex And Iecex

    WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 750-623 Supply Module DC 24V / 5-15V Table 14: Description of Marking Example for Approved I/O Modules According to ATEX and IECEx Printing on Text Description TÜV 07 ATEX 554086 X Approving authority and certificate numbers IECEx TUN 09.0001 X...

  • Page 30: Figure 13: Side Marking Example For Approved Ex I I/O Modules According To Atex And Iecex

    750-623 Supply Module DC 24V / 5-15V Pos : 78.8 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der Ex-i- und IEC-Ex-i-zug elas senen Bus klemmen gemäß C ENELEC und IEC _2013 @ 14\mod_1360569320118_21.doc x @ 111298 @ @ 1 Figure 13: Side Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx.
  • Page 31 WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 750-623 Supply Module DC 24V / 5-15V Table 15: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx Inscription Text Description TÜV 07 ATEX 554086 X Approving authority and certificate numbers IECEx TUN 09.0001X...

  • Page 32: Table 15: Description Of Marking Example For Approved Ex I I/O Modules According To Atex And Iecex

    Use in Hazardous Environments WAGO-I/O-SYSTEM 750 750-623 Supply Module DC 24V / 5-15V Table 15: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx Gases Equipment group: All except mining 3(1)G Category 3 (Zone 2) equipment containing a safety...

  • Page 33: Marking For America According To Nec 500

    750-623 Supply Module DC 24V / 5-15V Pos : 78.10 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Kennz eichnung für Ameri ka gemäß N EC 500 - Übersc hrift 3 @ 3\mod_1224158423187_21.doc x @ 24188 @ 3 @ 1 6.1.2...

  • Page 34: Installation Regulations

    Pos : 78.16 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 07 ATEX 554086_X_2013_2 @ 15\mod_1368620071975_21.doc...

  • Page 35: Special Conditions For Safe Use (Atex Certificate Tüv 12 Atex 106032 X)

    Pos : 78.18 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 12 ATEX 106032x_2013_2 @ 15\mod_1368620479454_21.doc...

  • Page 36: Special Conditions For Safe Use (Iec-Ex Certificate Tun 09.0001 X)

    Pos : 78.20 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 09.0001 X_2013_2 @ 15\mod_1368620660911_21.doc...

  • Page 37: Special Conditions For Safe Use (Iec-Ex Certificate Iecex Tun 12.0039 X)

    Pos : 78.22 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 12.0039 X_2013_2 @ 15\mod_1368620821493_21.doc...

  • Page 38: Special Conditions For Safe Use According To Ansi/Isa

    WAGO-I/O-SYSTEM 750 750-623 Supply Module DC 24V / 5-15V Pos : 78.24 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Errichtungsbesti mmung en AN SI ISA 12.12.01_2013_2 @ 15\mod_1368620942842_21.doc x @ 119794 @ 3 @ 1 6.2.5 Special Conditions for Safe Use According to ANSI/ISA 12.12.01...

  • Page 39: List Of Figures

    WAGO-I/O-SYSTEM 750 List of Figures 750-623 Supply Module DC 24V / 5-15V Pos : 80 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1 List of Figures Figure 1: View .......................

  • Page 40: List Of Tables

    List of Tables WAGO-I/O-SYSTEM 750 750-623 Supply Module DC 24V / 5-15V Pos : 82 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Number Notation ..................
  • Page 41 WAGO-I/O-SYSTEM 750 List of Tables 750-623 Supply Module DC 24V / 5-15V === Ende der Liste für T extmar ke Verzeic hnis_hi nten === Manual Version 1.2.0...
  • Page 42 Pos : 85 /D okumentation allgemei n/Einband/Einband H andbuc h - R üc kseite 2015 @ 9\mod_1285229376516_21.doc x @ 64944 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Hansastraße 27 • D-32423 Minden Phone: 05 71/8 87 –...

Table of Contents