Table 140: Description Of The Configuration Scripts For "Port - WAGO -I/O-IPC-C6 Manual

268 Appendix

Table 140: Description of the configuration scripts for "Port"

Parameter
Port
Telnet
Telnet Port
CoDeSys-Webserver
CoDeSys
Webserver Port
FTP
FTP Port
CoDeSys
CoDeSys Port
CoDeSys-Port
Number
Status Call
get_port_state
read
telnet
config_port
write
port=telnet state=<value>
get_port_state
read
codesys-webserver
config_port
write port=codesys-webserver
state=<value>
get_port_state
read
ftp
config_port
write
port=ftp state=<value>
get_rts3scfg_value
read PLC DisableTcpIp
Programming
change_rts_config
write area=PLC disable-
tcpip=<value>
get_rts3scfg_value
read
PLC TcpIpPort
change_rts_config
write area=PLC
TcpIpPort=<value>
WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Output/Input
Read the status of the
Telnet server:
enabled
disabled
Entries for <value> are:
enabled
disabled
Read status of the CoDeSys
web server. Entries for
<value> are:
enabled
disabled
Enable/disable the
CoDeSys web server.
Entries for <value> are:
enabled
disabled
Read the status of the FTP
server. Entries for <value>
are:
enabled
disabled
Entries for <value> are:
enabled
disabled
Query the status of the
value for
"DisableTcpIpProgrammin
g" in the CoDeSys
configuration:
YES:
CoDeSys port is not used.
NO: CoDeSys port is used.
Entries for <value> are:
YES:
CoDeSys port is not used.
NO:
CoDeSys port is used.
Value set in the CoDeSys
configuration for the
TCP/IP port.
Change the value of the
TCP/IP port number.
Specify the TCP/IP port
number for <value>.
Validity
immediate
immediate
immediate
immediate
Manual
Version 1.0.0