Figure 70: "Dp Parameters" Tab; Table 63: Description Of The Parameters - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
DP Parameters

Figure 70: "DP Parameters" tab

The following table explains the parameters listed in the register:

Table 63: Description of the Parameters

DP Parameters
Info
Identification
Station address
Station name
Activation
Slave active in current
configuration
GSD file ...
Standard parameters
Ident number
TSDR (TBit)
Lock/Unlock
Watchdog
Watchdog Control
Time (ms)
Manual
Version 1.0.0
PROFIBUS Master in CoDeSys 2.3
Information on the manufacturer-specific GSD file.
Enter the station address of the slave here that is set on the DIP
switch.
Station name from the GSD file.
Here, indicate whether the slave is to be parameterized and
configured.
Detailed information on the GSD file.
Information from GSD file.
The values are automatically taken over from the GSD file.
Function is not currently supported.
The Watchdog is activated if the control field is activated.
Here, enter the waiting time within which the master must
receive a signal before a replacement value is triggered for the
I/O modules. Set this replacement value using the interface
[Properties] on the "Inputs/Outputs" tab.
145