Connecting The Supply Voltage; Notes; Table 19: Use Of 750-602/626 Depending On The Application Area Of The I/O-Ipc - WAGO -I/O-IPC-C6 Manual

50

Connecting the Supply Voltage

Pos: 38.1 /Serie 758 (Funk, IPC und PFC)/Anschluss Daten- und Versorgungskabel/Anschluss Daten- und Versorgungskabel 758-87x Einleitung @ 10\mod_1312441245283_21.doc @ 75864 @ 1 @ 1
7 Connecting the Supply Voltage
The supply voltage is connected as follows, depending on the application area of
the I/O-IPC:
Scope of Delivery
The 750-602 Supply Module is no longer included in the scope of delivery as of
HW Version 11.

Table 19: Use of 750-602/626 depending on the application area of the I/O-IPC

Application Area
Cable length < 3 m
Pos: 38.2 /Serie 758 (Funk, IPC und PFC)/Anschluss Daten- und Versorgungskabel/Anschluss Daten- und Versorgungskabel 758-87x Leitungslänge > 3 m @ 10\mod_1313496549855_21.doc @ 77084 @ @ 1
Cable length > 3 m
Pos: 38.3 /Serie 758 (Funk, IPC und PFC)/Anschluss Daten- und Versorgungskabel/Anschluss Daten- und Versorgungskabel 758-87x Einleitungsende @ 10\mod_1313496553308_21.doc @ 77088 @ 222 @ 1
7.1

Notes

Electric voltage!
Only operate the I/O-IPC with 24 V DC PELV (Protective Extra Low Voltage) or
SELV (Safety Extra Low Voltage) power sources. There is a danger of electric
shock if this precaution is not observed.
Interruption of the supply voltage
If the power supply is interrupted by more than 1ms, the I/O-IPC is backed up and
automatically restarted.
• To ensure electrical isolation, a power supply unit each for the electronic
supply and the field supply must be used.
• Connect the power supply lines only when they are in a de-energized state.
• Keep power supply lines a sufficient distance away from electromagnetic
sources of interference in order to maintain a high level of interference
resistance of the 750 Series components against electromagnetic emissions.
• When laying any lines, make sure that you do not lay them within the shear
range of movable machine parts.
• Observe the correct layout of the potential equalization.
758-874/000-131 WAGO-I/O-IPC-C6
Filter Modules
750-602
750-626
WAGO-I/O-SYSTEM 750
Power Supply
See section, "Power Supply via
750-602 Supply Module"
See section "Power Supply via
750-626 Filter Module"
Version 1.0.0
Manual