Channel Digital Input Modules With Diagnostics And Input Process Data; Table 90: 2 Channel Digital Input Modules With Diagnostics And Input Process Data; Table 91: 2 Channel Digital Input Modules With Diagnostics And Input Process Data 75X-506 - WAGO -I/O-IPC-C6 Manual

230 I/O Modules
18.2.2.3 2 Channel Digital Input Modules with Diagnostics and Input Process
Data
750-507 (-508), -522,
753-507
The digital output modules have a diagnostic bit for each output channel. When an
output fault condition occurs (i.e., overload, short circuit, or broken wire), a
diagnostic bit is set. The diagnostic data is mapped into the Input Process Image,
while the output control bits are in the Output Process Image.

Table 90: 2 Channel Digital Input Modules with Diagnostics and Input Process Data

Input Process Image
Bit 7
Output Process Image
Bit 7
750-506,
753-506
The digital output module has 2-bits of diagnostic information for each output
channel. The 2-bit diagnostic information can then be decoded to determine the
exact fault condition of the module (i.e., overload, a short circuit, or a broken
wire). The 4-bits of diagnostic data are mapped into the Input Process Image,
while the output control bits are in the Output Process Image.

Table 91: 2 Channel Digital Input Modules with Diagnostics and Input Process Data 75x-506

Input Process Image
Bit 7
Diagnostic bits S1/S0, S3/S2: = '00'
Diagnostic bits S1/S0, S3/S2: = '01'
Diagnostic bits S1/S0, S3/S2: = '10'
Output Process Image
Bit 7
Bit 6 Bit 5
Bit 6 Bit 5
Bit 6 Bit 5 Bit 4
Bit 6 Bit 5 Bit 4
758-874/000-131 WAGO-I/O-IPC-C6
Bit 4 Bit 3
Bit 4 Bit 3
Bit 3 Bit 2
Diagnostic Diagnostic
bit S 3 bit S 2
Channel 2 Channel 2
standard mode
no connected load/short circuit against +24 V
Short circuit to ground/overload
Bit 3 Bit 2
not used not used
WAGO-I/O-SYSTEM 750
Bit 2 Bit 1
Diagnostic Diagnostic
bit S 2
Channel 2 Channel 1
Bit 2 Bit 1
controls controls
DO 2
Channel 2 Channel 1
Bit 1
Diagnostic Diagnostic
bit S 1
Channel 1 Channel 1
Bit 1
controls controls
DO 2
Channel 2 Channel 1
Version 1.0.0
Bit 0
bit S 1
Bit 0
DO 1
Bit 0
bit S 0
Bit 0
DO 1
Manual