Configuration - WAGO -I/O-IPC-C6 Manual

70

Configuration

Pos: 43 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Inbetriebnehmen - Konfigurieren - Parametrieren/Konfigurieren - Überschrift 1 @ 5\mod_1247578046546_21.doc @ 37410 @ 1 @ 1
9 Configuration
Pos: 44.1 /Serie 758 (Funk, IPC und PFC)/Konfigurieren/Konfigurieren 785-87x - allgemein 1 @ 10\mod_1312455450627_21.doc @ 75901 @ 2 @ 1
The following methods are available for configuring the I/O-IPC:
• Access using the PC via Internet browser to the Web-based management
(section Configuration via "Web-based Management (WBM)")
• Access using the PC via a terminal program (via ETHERNET and/or RS-232
interface) to the "IPC Configuration Tool" (section "Configuration with a
Terminal Program")
• Access via the I/O-IPC using the touch screen/monitor and USB keyboard to
the "IPC Configuration Tool" (section "Configuration with
Touchscreen/Monitor and USB Keyboard")
• Access via the PLC program CoDeSys using WagoConfigToolLIB.lib (section
"Calling the ' WagoConfigToolLIB.lib'")
The "IPC Configuration Tool" makes the same parameters available for the
configuration of the I/O-IPC as the WBM. Descriptions of the parameters are
available in the section "Information" Page.
WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0