Table 141: Description Of The Configuration Scripts For "Modbus - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6

Table 141: Description of the configuration scripts for "MODBUS"

Parameter
MODBUS
MODBUS/UDP
MODBUS/UDP
Status
MODBUS/TCP
MODBUS/TCP
Status
Timeout (msec)
MODBUS/RTU
State
Node ID
Timeout (msec)
Manual
Version 1.0.0
Status Call
get_rts3scfg_value
read
MODBUS_UDP state
change_rts_config
write area=MODBUS_UDP
state=<value>
get_rts3scfg_value
read
MODBUS_TCP state
change_rts_config
write area=MODBUS_TCP
state=<value>
get_rts3scfg_value
read MODBUS_TCP
TCPTimeout
change_rts_config
write area=MODBUS_TCP
timeout=<value>
get_rts3scfg_value
read
MODBUS_RTU state
change_rts_config
write area=MODBUS_RTU
timeout=<value>
get_rts3scfg_value
read MODBUS_RTU
Node_ID
change_rts_config
write area=MODBUS_RTU
node-id=<value>
get_rts3scfg_value
read
MODBUS_RTU Timeout
change_rts_config
write area=MODBUS_RTU
Timeout=<value>
Appendix
Output/Input
Status of MODBUS/UDP:
enabled
disabled
Enable/disable the
MODBUS/UDP server.
Entries for <value> are:
enabled
disabled
Status of MODBUS/TCP:
enabled
disabled
Enable/disable the
MODBUS/TCP server.
Entries for <value> are:
enabled
disabled
Timeout value for
MODBUS/TCP
Here, set the time period
(timeout) for the
MODBUS/TCP connection
(ms), after which the
connection is automatically
ended during a break in
communication.
Status of MODBUS/RTU.
Entries for <value> are:
enabled
disabled
Enable/disable the
MODBUS/RTU server.
Entries for <value> are:
enabled
disabled
Node ID for
MODBUS/RTU
Node ID (number) for
MODBUS/RTU
Specify the node-ID for
<value>
Timeout value for
MODBUS/RTU
Change timeout value (ms)
for MODBUS/RTU.
Specify the timeout value in
ms for <value>.
269
Validity
immediate
immediate
immediate