Parameter Set-Up, General Information; Quick Menu Key Functions - Danfoss VLT AQUA Drive FC 200 Programming Manual

How to Program
Ex.: Current readout 5.25 A; 15.2A 105A.
See parameter group 0-2* LCP Display for further details.
Status screen I
This readout state is standard after start-up or initialization.
Press [Info] to obtain information about the measurement
links to the displayed operating variables (1.1, 1.2, 1.3, 2
and 3).
See the operating variables shown in the screen below.
Status
799 RPM
1.1
1.2
Auto Remote Ramping
2
3
Figure 2.6
Status screen II
See the operating variables (1.1, 1.2, 1.3 and 2) shown in
the screen below.
In the example, Speed, Motor current, Motor power and
Frequency are selected as variables in the first and second.
Status
207RPM
1.1
Auto Remote Running
Figure 2.7
®
VLT AQUA Drive Programming Guide
1 (1)
7.83 A 36.4 kW
0.000
53.2%
1.3
1 (1)
5.25A 24.4 kW
6.9Hz
1.3
1.2
2
®
MG20O622 - VLT is a registered Danfoss trademark
Status screen III
This state displays the event and action of the Smart Logic
Control. For further information, see 3.12 Parameters 13-**
Smart Logic Control.
Status
778 RPM
State: 0 o 0 (o )
When: -
Do: -
Auto Remote Running
Figure 2.8
2.2.5 Parameter Set-Up, General
Information
The adjustable frequency drive can be used for practically
all assignments, which is why the number of parameters is
quite large. The adjustable frequency drive offers a choice
between two programming modes - a Main Menu and a
Quick Menu mode.
The former provides access to all parameters. The latter
takes the user through a few parameters making it
possible to program the majority of water/waste water
applications.
Regardless of the mode of programming, parameter can
be changes in both Main Menu mode and in Quick Menu
mode.

2.2.6 Quick Menu Key Functions

Pressing [Quick Menus]
The list indicates the different areas contained in the Quick
menu.
Figure 2.9
1 (1)
0.86 A 4.0 kW
2-5
2 2