Changing A Text Value; Changing A Group Of Numeric Data Values; Infinitely Variable Change Of Numeric Data Value; Value, Step-By-Step - Danfoss VLT AQUA Drive FC 200 Programming Manual

How to Program

2.2.11 Changing a Text Value

If the selected parameter is a text value, change the text
▲ ▼
value with the [ ] [ ] keys.
Place the cursor on the value to save and press [OK].
740RPM
Basic Settings
0 -01 Language
[0] English
Figure 2.12
2.2.12 Changing a Group of Numeric Data
Values
If the chosen parameter represents a numeric data value,
change the chosen data value by means of the [
navigation keys as well as the [
◀ ▶
[ ] [ ] keys to move the cursor horizontally.
113 RPM
Load depen. setting
1 - 60 Low speed load
compensation
100%
Figure 2.13
▲ ▼
Press [ ] [ ] keys to change the data value. [
▼
the data value, and [ ] decreases the data value. Place the
cursor on the value to save and press [OK].
729RPM
Load depen. setting
1 - 60 Low speed load
compensation
1 0%
6
Figure 2.14
®
VLT AQUA Drive Programming Guide
10.64 A 1 [1]
0-0*
◀ ▶
] [ ]
▲ ▼
] [ ] navigation keys. Press
1.78 A 1(1)
1- 6*
▲
] increases
6.21A 1(1)
1- 6*
®
MG20O622 - VLT is a registered Danfoss trademark
2.2.13 Infinitely Variable Change of
Numeric Data Value
If the chosen parameter represents a numeric data value,
◀ ▶
select a digit with [ ] [ ].
Figure 2.15
Change the selected digit infinitely variably with [
The chosen digit is indicated by the cursor. Place the
cursor on the digit to save and press [OK].
957RPM
Start Adjustments
1-71 High starting torque time
0. s
4
Figure 2.16

2.2.14 Value, Step-by-Step

Certain parameters can be changed step by step or
infinitely varying. This applies to 1-20 Motor Power [kW],
1-22 Motor Voltage and 1-23 Motor Frequency.
The parameters are changed both as a group of numeric
data values and as numeric data values infinitely varying.
2
▲ ▼
] [ ].
11.58A 1 (1)
1-7*
2-9
2