Danfoss VLT AQUA Drive FC 200 Programming Manual page 38

Parameter Description
0-51 Set-up Copy
Option:
[0] No copy
3 3
[1] Copy to set-
up 1
[2] Copy to set-
up 2
[3] Copy to set-
up 3
[4] Copy to set-
up 4
[9] Copy to all
3.2.7 0-6* Password
0-60 Main Menu Password
Range:
100 [-9999 -
*
9999 ]
0-61 Access to Main Menu w/o Password
Option:
[0] Full access
[1] LCP: Read only Prevent unauthorized editing of main menu
[2] LCP: No access Prevent unauthorized viewing and editing of
[3] Bus: Read only
[4] Bus: No access
[5] All: Read only
[6] All: No access
If [0] Full access is selected, then 0-60 Main Menu Password,
0-65 Personal Menu Password and 0-66 Access to Personal
Menu w/o Password will be ignored.
3-12
®
VLT
Function:
No function
Copies all parameters in the present
Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 1.
Copies all parameters in the present
Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 2.
Copies all parameters in the present
Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 3.
Copies all parameters in the present
Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 4.
Copies the parameters in the present set-up
over to each of the set-ups 1 to 4.
Function:
Define the password for access to the main
menu via the [Main Menu] key. If
0-61 Access to Main Menu w/o Password is
set to [0] Full access, this parameter will be
ignored.
Function:
Disables password defined in 0-60 Main
Menu Password.
parameters.
main menu parameters.
MG20O622 - VLT
AQUA Drive Programming Guide
0-65 Personal Menu Password
Range:
200 [-9999 -
*
9999 ]
0-66 Access to Personal Menu w/o Password
Option:
[0] Full access
[1] LCP: Read only Prevents unauthorized editing of My
[2] LCP: No access Prevents unauthorized viewing and editing
[3] Bus: Read only
[4] Bus: No access
[5] All: Read only
[6] All: No access
If 0-61 Access to Main Menu w/o Password is set to [0] Full
access, this parameter will be ignored.
0-67 Bus Password Access
Range:
0 [0 - 9999 ] Writing to this parameter enables users to
*
3.2.8 0-7* Clock Settings
Set the time and date of the internal clock. The internal
clock can be used, for example, for timed actions, energy
log, trend analysis, date/time stamps on alarms, logged
data and preventive maintenance.
It is possible to program the clock for Daylight Saving
Time/summertime, weekly working days/non-working days
including 20 exceptions (holidays, etc.). Although the clock
settings can be set via the LCP, they can also be set along
with timed actions and preventative maintenance
functions using the MCT 10 Set-up Software software tool.
®
is a registered Danfoss trademark
Function:
Define the password for access to the My
Personal Menu via the [Quick Menu] key. If
0-66 Access to Personal Menu w/o Password
is set to [0] Full access, this parameter will
be ignored.
Function:
Disables password defined in 0-65 Personal
Menu Password.
Personal Menu parameters.
of My Personal Menu parameters.
Function:
unlock the adjustable frequency drive from
bus/MCT 10 Set-up Software.