Danfoss VLT AQUA Drive FC 200 Programming Manual page 76

Parameter Description
Setting in parameter
group 5-3*
[201] Pump 1
Running
3 3
[202] Pump 2
Running
[203] Pump 3
Running
Table 3.14 Pumps Controlled by the Cascade Controller
5-30 Terminal 27 Digital Output
Option:
[0] No operation Same options and functions as parameter
*
5-31 Terminal 29 Digital Output
Option:
[0] No operation Same options and functions as parameter
*
5-32 Term X30/6 Digi Out (MCB 101)
Option:
[0] No operation This parameter is active when option module
*
5-33 Term X30/7 Digi Out (MCB 101)
Option:
[0] No operation This parameter is active when option module
*
3.7.4 5-4* Relays
Parameters for configuring the timing and the output
functions for the relays.
5-40 Function Relay
Option:
[0] No operation
[1] Control ready
[2] Drive ready
[3] Drive rdy/rem ctrl
[4] Stand-by / no warning
3-50
®
VLT
Setting in 25-05 Fixed Lead Pump
[0] No [1] Yes
Controlled by Adjustable
RELAY1 frequency drive
controlled
Controlled by Controlled by
RELAY2 RELAY1
Controlled by
RELAY2
Function:
group 5-3*.
Function:
group 5-3*.
Function:
MCB 101 is mounted in the adjustable
frequency drive. Same options and functions
as parameter group 5-3*.
Function:
MCB 101 is mounted in the adjustable
frequency drive. Same options and functions
as parameter group 5-3*.
Function:
Select options to define the
function of the relays.
The selection of each mechanical
relay is realized in an array
parameter.
MG20O622 - VLT
AQUA Drive Programming Guide
5-40 Function Relay
Option:
[5] Running
[6] Running / no warning
[8] Run on ref/no warn
[9] Alarm
[10] Alarm or warning
[11] At torque limit
[12] Out of current range
[13] Below current, low
[14] Above current, high
[15] Out of speed range
[16] Below speed, low
[17] Above speed, high
[18] Out of feedb. range
[19] Below feedback, low
[20] Above feedback, high
[21] Thermal warning
[25] Reverse
[26] Bus OK
[27] Torque limit stop
[28] Brake: No Brake War
[29] Brake ready, no fault
[30] Brake fault (IGBT)
[35] External Interlock
[36] Control word bit 11
[37] Control word bit 12
[40] Out of ref range
[41] Below reference, low
[42] Above ref, high
[45] Bus ctrl.
[46] Bus ctrl, 1 if timeout
[47] Bus ctrl, 0 if timeout
[60] Comparator 0
[61] Comparator 1
[62] Comparator 2
[63] Comparator 3
[64] Comparator 4
[65] Comparator 5
[70] Logic rule 0
[71] Logic rule 1
[72] Logic rule 2
[73] Logic rule 3
[74] Logic rule 4
[75] Logic rule 5
[80] SL digital output A
[81] SL digital output B
[82] SL digital output C
[83] SL digital output D
[84] SL digital output E
[85] SL digital output F
®
is a registered Danfoss trademark
Function: