Danfoss VLT AQUA Drive FC 200 Programming Manual page 34

Parameter Description
0-20 Display Line 1.1 Small
Option:
[1836] Analog Input
3 3
X48/2 [mA]
[1837] Temp. Input X48/4
[1838] Temp. Input X48/7
[1839] Temp. Input
X48/10
[1860] Digital Input 2
[2117] Ext. 1 Reference
[Unit]
[2118] Ext. 1 Feedback
[Unit]
[2119] Ext. 1 Output [%]
[2137] Ext. 2 Reference
[Unit]
[2138] Ext. 2 Feedback
[Unit]
[2139] Ext. 2 Output [%]
[2157] Ext. 3 Reference
[Unit]
[2158] Ext. 3 Feedback
[Unit]
[2159] Ext. 3 Output [%]
[2230] No-Flow Power
[2316] Maintenance Text
[2580] Cascade Status
[2581] Pump Status
[2791] Cascade Reference Reference output for use with
[2792] % Of Total
Capacity
[2793] Cascade Option
Status
[2794] Cascade System
Status
[2795] Advanced Cascade
Relay Output [bin]
[2796] Extended Cascade
Relay Output [bin]
3-8
®
VLT AQUA Drive Programming Guide
Function:
The value of the reference for
extended Closed-loop Controller 1
The value of the feedback signal for
extended Closed-loop Controller 1
The value of the output from
extended Closed-loop Controller 1
The value of the reference for
extended Closed-loop Controller 2
The value of the feedback signal for
extended Closed-loop Controller 2
The value of the output from
extended Closed-loop Controller 2
The value of the reference for
extended Closed-loop Controller 3
The value of the feedback signal for
extended Closed-loop Controller 3
The value of the output from
extended Closed-loop Controller 3
The calculated No-Flow Power for the
actual operating speed
Status for the operation of the
cascade controller
Status for the operation of each
individual pump controlled by the
cascade controller
follower drives.
Readout parameter to show the
system operating point as a %
capacity of total system capacity.
Readout parameter to show the
status of the cascade system.
MG20O622 - VLT
0-20 Display Line 1.1 Small
Option:
[2920] Derag Power[kW]
[2921] Derag Power[HP]
[3110] Bypass Status
Word
[3111] Bypass Running
Hours
[9920] HS Temp. (PC1)
[9921] HS Temp. (PC2)
[9922] HS Temp. (PC3)
[9923] HS Temp. (PC4)
[9924] HS Temp. (PC5)
[9925] HS Temp. (PC6)
[9926] HS Temp. (PC7)
[9927] HS Temp. (PC8)
[9951] PC Debug 0
[9952] PC Debug 1
[9953] PC Debug 2
[9954] PC Debug 3
[9955] PC Debug 4
[9956] Fan 1 Feedback
[9957] Fan 2 Feedback
[9958] PC Auxiliary Temp
[9959] Power Card Temp.
0-21 Display Line 1.2 Small
Option:
[1601] Analog input
*
53
0-22 Display Line 1.3 Small
Option:
[1614] Motor Current The options are the same as those listed
*
0-23 Display Line 2 Large
Option:
[1613] Frequency The options are the same as those listed for
*
0-24 Display Line 3 Large
Option:
[1652] Feedback [Unit] The options are the same as those
*
®
is a registered Danfoss trademark
Function:
Function:
Select a variable for display in line 1,
middle position.
The options are the same as those
listed for 0-20 Display Line 1.1 Small.
Function:
Select a variable for display in line 1,
right position.
for 0-20 Display Line 1.1 Small.
Function:
Select a variable for display in line 2.
0-20 Display Line 1.1 Small.
Function:
listed for 0-20 Display Line 1.1 Small.
Select a variable for display in line 2.