Danfoss VLT AQUA Drive FC 200 Programming Manual page 197

Parameter Lists
4 Parameter Lists
4.1 Parameter Options
4.1.1 Default settings
Changes during operation:
"TRUE" means that the parameter can be changed while
the adjustable frequency drive is in operation and "FALSE"
means that the adjustable frequency drive must be
stopped before a change can be made.
4 set-up:
'All set-up': the parameter can be set individually in each
of the four set-ups, i.e. one single parameter can have four
different data values.
Conv. 100 75 74
index
Conv. 1 3,600,00 3,60
factor 0 0
Table 4.1
Data type Description
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible String
33 Normalized value 2 bytes
35 Bit sequence of 16 Boolean variables
54 Time difference w/o date
Table 4.2
®
VLT AQUA Drive Programming Guide
70 67 6 5 4
60 1/60 1,000,0 100,00 10,00
00 0 0
®
MG20O622 - VLT is a registered Danfoss trademark
'1 set-up': the data value will be the same in all set-ups.
SR:
Size related
N/A:
No default value available.
Conversion index:
This number refers to a conversion figure used when
writing or reading by means of an adjustable frequency
drive.
3 2 1 0 -1
1,000 100 10 1 0.1 0.01 0.001 0.000
-2 -3 -4 -5 -6
0.00001 0.00000
1 1
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
4 4
4-1