Danfoss VLT AQUA Drive FC 200 Programming Manual page 110

Parameter Description
13-52 SL Controller Action
Array [20]
Option:
3 3
[22] Run
[23] Run reverse
[24] Stop
[26] DC Brake
[27] Coast
[28] Freeze output
[29] Start timer 0
[30] Start timer 1
[31] Start timer 2
[32] Set digital out A
low
[33] Set digital out B
low
[34] Set digital out C
low
[35] Set digital out D
low
[36] Set digital out E
low
[37] Set digital out F
low
[38] Set digital out A
high
[39] Set digital out B
high
[40] Set digital out C
high
[41] Set digital out D
high
[42] Set digital out E
high
3-84
®
VLT AQUA Drive Programming Guide
Function:
Issues a start command to the
adjustable frequency drive.
Issues a start reverse command to the
adjustable frequency drive.
Issues a stop command to the
adjustable frequency drive.
Issues a DC stop command to the
adjustable frequency drive.
The adjustable frequency drive coasts
immediately. All stop commands
including the coast command stop the
SLC.
Freezes the output frequency of the
adjustable frequency drive.
Starts timer 0, see 13-20 SL Controller
Timer for further description.
Starts timer 1, see 13-20 SL Controller
Timer for further description.
Starts timer 2, see 13-20 SL Controller
Timer for further description.
Any output with 'digital output 1'
selected is low (off).
Any output with 'digital output 2'
selected is low (off).
Any output with 'digital output 3'
selected is low (off).
Any output with 'digital output 4'
selected is low (off).
Any output with 'digital output 5'
selected is low (off).
Any output with 'digital output 6'
selected is low (off).
Any output with 'digital output 1'
selected is high (closed).
Any output with 'digital output 2'
selected is high (closed).
Any output with 'digital output 3'
selected is high (closed).
Any output with 'digital output 4'
selected is high (closed).
Any output with 'digital output 5'
selected is high (closed).
MG20O622 - VLT
13-52 SL Controller Action
Array [20]
Option:
[43] Set digital out F
high
[60] Reset Counter A
[61] Reset Counter B
[70] Start Timer 3
[71] Start Timer 4
[72] Start Timer 5
[73] Start Timer 6
[74] Start Timer 7
[80] Sleep Mode
[90] Set ECB Bypass
Mode
[91] Set ECB Drive
Mode
[100] Reset Alarms
®
is a registered Danfoss trademark
Function:
Any output with 'digital output 6'
selected is high (closed).
Resets Counter A to zero.
Resets Counter A to zero.
Starts timer 3, see 13-20 SL Controller
Timer for further description.
Starts timer 4, see 13-20 SL Controller
Timer for further description.
Starts timer 5, see 13-20 SL Controller
Timer for further description.
Starts timer 6, see 13-20 SL Controller
Timer for further description.
Starts timer 7, see 13-20 SL Controller
Timer for further description.
Starts Sleep mode.