Parameters 0-** Operation And Display - Danfoss VLT AQUA Drive FC 200 Programming Manual

Parameter Description
Parameter descriptions and selections are displayed on the
graphic (GLCP) or numeric (NLCP) in the display area. (See
2 How to Program for details.) Access the parameters by
pressing the [Quick Menu] or [Main Menu] key on the
3 3
control panel. The quick menu is used primarily for
commissioning the unit at start-up by providing those
parameters necessary to start operation. The main menu
provides access to all the parameters for detailed
application programming.
All digital input/output and analog input/output terminals
are multifunctional. All terminals have factory default
functions suitable for the majority of water applications,
but if other special functions are required, they must be
programmed in parameter group 5-** or 6-**.

3.2 Parameters 0-** Operation and Display

Parameters related to the fundamental functions of the
adjustable frequency drive, function of the LCP keys and
configuration of the LCP display.
3.2.1 0-0* Basic Settings
0-01 Language
Option:
[0] English
[1] Deutsch
[2] Francais
[3] Dansk
[4] Spanish
[5] Italiano
[6] Svenska
[7] Nederlands
[10] Chinese
[20] Suomi
[22] English US
[27] Greek
[28] Bras.port
[36] Slovenian
[39] Korean
3-2
®
VLT AQUA Drive Programming Guide
Function:
Defines the language to be used in the
display.
The adjustable frequency drive can be
delivered with two different language
packages. English and German are
included in both packages. English
cannot be erased or manipulated.
Part of Language packages 1 - 2
Part of Language packages 1 - 2
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Language package 2
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 2
MG20O622 - VLT
0-01 Language
Option:
[40] Japanese
[41] Turkish
[42] Trad.Chinese
[43] Bulgarian
[44] Srpski
[45] Romanian
[46] Magyar
[47] Czech
[48] Polski
[49] Russian
[50] Thai
[51] Bahasa Indonesia Part of Language package 2
[52] Hrvatski
0-02 Motor Speed Unit
Option: Function:
The display showing depends on settings in 0-02 Motor
Speed Unit and 0-03 Regional Settings. The default
setting of 0-02 Motor Speed Unit and 0-03 Regional
Settings depends on which region of the world the
adjustable frequency drive is supplied to, but can be
re-programmed as required.
NOTICE!
Changing the Motor Speed Unit will reset certain
parameters to their initial value. It is
recommended to select the motor speed unit
first before modifying other parameters.
[0] RPM Selects display of motor speed variables and
parameters (i.e., references, feedback and limits) in
terms of motor speed (RPM).
[1] Hz Selects display of motor speed variables and
parameters (i.e., references, feedback and limits) in
terms of output frequency to the motor (Hz).
NOTICE!
This parameter cannot be adjusted while the motor is
running.
®
is a registered Danfoss trademark
Function:
Part of Language package 2
Part of Language package 1
Part of Language package 2
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 2
Part of Language package 2