Danfoss VLT AQUA Drive FC 200 Programming Manual page 123

Parameter Description
3.14.6 15-6* Option Ident.
This read-only parameter group contains information about
the hardware and software configuration of the options
installed in slots A, B, C0 and C1.
15-60 Option Mounted
Array [8]
Range: Function:
0 [0 - 0 ] View the installed option type.
*
15-61 Option SW Version
Array [8]
Range: Function:
0 [0 - 0 ] View the installed option software version.
*
15-62 Option Ordering No
Array [8]
Range: Function:
0 [0 - 0 ] Shows the ordering number for the installed
*
options.
15-63 Option Serial No
Array [8]
Range: Function:
0 [0 - 0 ] View the installed option serial number.
*
15-70 Option in Slot A
Range: Function:
0 [0 - 0 ] View the type code string for the option installed
*
in slot A, and a translation of the type code string.
For example, for type code string 'AX', the
translation is 'No option'.
15-71 Slot A Option SW Version
Range: Function:
0 [0 - 0 ] View the software version for the option installed
*
in slot A.
15-72 Option in Slot B
Range: Function:
0 [0 - 0 ] View the type code string for the option installed
*
in slot B, and a translation of the type code string.
For example, for type code string 'BX', the
translation is 'No option'.
15-73 Slot B Option SW Version
Range: Function:
0 [0 - 0 ] View the software version for the option installed
*
in slot B.
®
VLT AQUA Drive Programming Guide
15-74 Option in Slot C0
Range:
0
15-75 Slot C0/E0 Option SW Version
Range:
0
15-76 Option in Slot C1
Range:
0
15-77 Slot C1/E1 Option SW Version
Range:
0
15-92 Defined Parameters
Array [1,000]
Range:
0
15-93 Modified Parameters
Array [1,000]
Range:
0
15-98 Drive Identification
Range:
0
15-99 Parameter Metadata
Array [23]
Range:
0
®
MG20O622 - VLT is a registered Danfoss trademark
Function:
[0 - 0 ] View the type code string for the option installed
*
in slot C, and a translation of the type code string.
For example, for type code string 'CXXXX', the
translation is 'No option'.
Function:
[0 - 0 ] View the software version for the option installed
*
in slot C.
Function:
[0 - 0 ] Shows the typecode string for the options (CXXXX
*
if no option) and the translation, e.g., >No option<.
Function:
[0 - 0 ] Software version for the installed option in option
*
slot C.
Function:
[0 - 9999 ] View a list of all defined parameters in the
*
adjustable frequency drive. The list ends with 0.
Function:
[0 - 9999 ] View a list of the parameters that have been
*
changed from their default setting. The list
ends with 0. Changes may not be visible until
up to 30 s after implementation.
[0 - 0 ]
*
Function:
[0 - 9999 ] This parameter contains data used by the MCT
*
10 Set-up Software software tool.
Function:
3-97
3 3