Danfoss VLT AQUA Drive FC 200 Programming Manual page 163

Parameter Description
23-01 ON Action
Arra [10]
Option: Function:
[18] Select ramp 1
[19] Select ramp 2
[22] Run
[23] Run reverse
[24] Stop
[26] DC Brake
[27] Coast
[32] Set digital out A low
[33] Set digital out B low
[34] Set digital out C low
[35] Set digital out D low
[36] Set digital out E low
[37] Set digital out F low
[38] Set digital out A high
[39] Set digital out B high
[40] Set digital out C high
[41] Set digital out D high
[42] Set digital out E high
[43] Set digital out F high
[60] Reset Counter A
[61] Reset Counter B
[80] Sleep Mode
[90] Set ECB Bypass Mode
[91] Set ECB Drive Mode
[100] Reset Alarms
NOTICE!
For choices [32] - [43], see also parameter group 5-3*,
Digital Outputs and 5-4*, Relays.
23-02 OFF Time
Array [10]
Range: Function:
Size [ 0 - Sets the OFF time for the Timed Action.
related 0 ] NOTICE!
*
The adjustable frequency drive has no
backup of the clock function and the
set date/time will reset to default
(2000-01-01 00:00) after a power-
down unless a real time clock module
with backup is installed. In 0-79 Clock
Fault, it is possible to program a
warning to be issued if the clock has
not been set properly, e.g., after a
power-down.
®
VLT AQUA Drive Programming Guide
[0]
[0] All days
[1] Working days
[2] Non-working days
[3] Monday
[4] Tuesday
[5] Wednesday
[6] Thursday
[7] Friday
[8] Saturday
[9] Sunday
®
MG20O622 - VLT is a registered Danfoss trademark
23-03 OFF Action
Array [10]
See 23-01 ON Action for available actions.
Option:
Disabled
*
23-04 Occurrence
Array [10]
Option: Function:
Select the day(s) to which the timed
action applies. Specify working/non-
working days in 0-81 Working Days,
0-82 Additional Working Days and
0-83 Additional Non-Working Days.
3
Function:
3-137
3