Parameter Group 15: Drive Information - Danfoss VLT Micro Drive FC 51 Series Programming Manual

VLT Micro Drive FC 51

4.12. Parameter Group 15: Drive Information

4.12.1. 15-** Drive Information
Parameter group containing information on operating data, hardware configuration, software version, etc.
4.12.2. 15-0* Operating Data
Parameter group containing operating data e.g. Operating Hours, kWh counters, Power Ups, etc.
4.12.3. 15-00 Operating Time
15-00 Operating Time
Range:
*
0 days [0 - 65535 days]
15-01 Running Hours
Range:
*
0 [0 - 2147483647]
15-02 kWh Counter
Range:
0 [0 - 65535]
15-03 Power Ups
Range:
0 [0 - 2147483647]
15-04 Over Temps
Range:
0 [0 - 65535]
15-05 Over Volts
Range:
*
0 [0 - 65535]
15-06 Reset kWh Counter
Option:
Do Not Reset
*
[0]
[1] Reset Counter
15-07 Reset Running Hours Counter
Option:
Do Not Reset
*
[0]
[1] Reset Counter
Function:
View running hours of frequency converter.
The value is saved at power off and cannot be reset.
Function:
View running hours of motor.
The value is saved at power off and can be reset in par. 15-07,
Function:
View power consumption in kWh as a mean value over one hour.
Reset counter in par. 15-06, Reset kWh Counter
Function:
View number of times frequency converter has been powered up.
Counter cannot be reset.
Function:
View number of times frequency converter has tripped due to over temperature.
Counter cannot be reset.
Function:
View number of times frequency converter has tripped due to over voltage.
Counter cannot be reset.
Function:
Counter is not reset.
Counter is reset.
Function:
Counter is not reset.
Counter is reset.
MG.02.C4.02 - VLT is a registered Danfoss trademark
4. Parameter Descriptions
Reset Running Hours Counter
.
4
.
57